Obtain all remote transmitters for this vehicle.

1. Remove center fascia (the plate surrounding the radio) and locate the alarm system control module. Ensure that the memory switch is in the OFF position.

2. Insert key into the ignition and turn ignition to the ON position.

3. After 5 seconds slide the switch on the alarm system control module to the SET position.

4. Press the LOCK button on the first remote to be programmed.

5. If programming a second remote press the LOCK button on the second remote.

6. Slide the switch on the alarm system control module to the OFF position.

7. Turn the ignition OFF and remove key. Replace center fascia.

8. Programming is now complete, test remotes to ensure proper programming.

Disclaimer